Yamaha AV RECEIVER RX-V1065 Owner's Manual page 68

3 Enter the desired remote control ID code.
To switch to IDI:
Press [] Numeric keys to enter "5019".
To switch to ID2:
Press []Numeric keys to enter "5020".
Once the remote control code is registered,
[_TRANSMIT blinks twice.
If it fails, _]TRANSMIT blinks six times. Repeat
from step 1.
-4'--
• lfyou initialize the settings nf this unit, "REMOTE 1D" (remote control
code of this unit) is set to "IDI".
65
En