Using Your Headphones; Displaying Input Signal Information; Changing Information On The Front Panel Display - Yamaha AV RECEIVER RX-V1065 Owner's Manual

I[it_r_,Nq;
Press _PURE DIRECT (or [_PURE DIRECT)
to turn the Pure Direct mode on or off.
(_PURE DIRECT
lights up when you set Pure Direct
mode on.
The following features are disabled in the Pure Direct
mode.
- sound field program, tone control
- display and operation of the Option menu and Setup
menu
- multi-zone function
"4'--
• The font panel display automatically turns off while this unit in the Pure
Direct mode.
Plug your headphones in the @PHONES jack on
the front panel.
When you select a sound field program while using the
headphones, the mode is automatically set to SILENT
CINEMA mode.
• When you connect headphones, no signals are output at the speaker
terminals.
• When multi-channel signals are processed, sounds in all channels are
divided to lefl and right channels. When "MULTI CH" is selected as the
input source, only fl'ont L/R sounds are output frnm the headphones.
When HDMI 1-4 or AV 1-4 is selected as the input source,
you can display audio/video signal information.
_%,._
• Input signal infl_rmation is displayed on both the GU1 screen and frnm
panel display.
Select the desired input source and then
press _OPTION on the remote control.
The Option menu for the selected input source is
displayed (page 47).
Press _Cursor A / _ to select "Signal Info"
and then press _ENTER.
Information on the input signal is displayed. See
page 48 for details about each information.
Press @INFO (or [_INFO) repeatedly.
Available information differs depending on the selected
input source.
For example, if you select HDMI1 input and display "DSP
Program", the following screen appears on the front panel
display.
Input source
I I TI b tl T
I--I I+ I t ! I
•':::; "L r..:::, "iq h "L
Sound field program
Input source Information
HDMI1-4 Input
AV1-6 DSP Program
AUDIO1/2 Audio Decoder
V-AUX
PHONO
iPod (DOCK) (simple
remote mode)
BLUETOOTH (DOCK)
USB
(on play information display)
iPod (DOCK) (menu
DSP Program, Audio Decoder,
browse mode) Song, Artist, Album
(on GUI screen)
List
TUNER
Frequency, DSP Program,
Audio Decoder
(t_r HD Radio information)
Call Sign*, Category*, Artist /
Song*, Album*, %g Info, DSP
Program, Audio Decoder,
Frequency
SIRIUS Channel, Category, Artist /
Song, Composer, Antenna, DSP
Program, Audio Decoder
XM Channel, Category, Artist /
Song, Antenna, DSP Program,
Audio Decoder
MULTI CH Input
• If an HDMI relaled error occurs, error infnrmalinn is displayed at
lhe bnllnm of the screen.
3 To exit the Option menu, press _OPTION.
• lnff>rmalion marked with "'_" is nol available when analog HD Radio
station is selecled.
24
En