Connecting A Yamaha Ipod Universal Dock Or Bluetooth Wireless Audio Receiver; Connecting A Usb Storage Device; Using The Video Aux Jacks; Transmitting/Receiving Remote Control Signals - Yamaha AV RECEIVER RX-V1065 Owner's Manual

• Transmitting/receiving remote control signals
When the components have the capability of the
transmission of the remote control signals, connect the
REMOTE IN and REMOTE OUT jacks to the remote
control input and output jack with the monaural analog
mini cable as follows.
"l'lf If I:i"I _ I'll I"
Connect a USB memory device or USB portable audio
player to the USB port on the front panel of this unit. For
information about USB storage devices supported by this
unit, see page 45.
Remote
_ control in
control out _ _ Remote
/ 1
Infrared signal IR flasher or Yamaha
receiver or Yamaha component
component (CD or DVD player, etc.)
• If connecting a Yamaba component that supports the SCENE control
signal reception to tbe REMOTE OUT jack of this unit, you can start
playback on the Yamaha component by using the SCENE Rmction
(page 22).
• If connecting a component other than Yamaba products to the REMOTE
OUT.jack of this unit, set "SCENE 1R" to "OFF" in the advanced setup
menu (page 64).
USB memory device or
USB portable audio player
This unit has the DOCK terminal, to which you can
connect a Yamaha iPod universal dock (YDS-11, sold
separately) or a Bluetooth wireless audio receiver (YBA-
10, sold separately). You can play an iPod or a Bluetooth
component with this unit by connecting it to the DOCK
terminal.
Use a dedicated cable for connection between the dock/
receiver and this unit.
Use the VIDEO AUK jacks on the front panel to connect a
game console or a video camera to this unit. Be sure to
turn down the volume of this unit and other components
before making connections.
Yamaha iPod universal dock or
Bluetooth wireless audio receiver
Game console or video
camera
o..
17 En