Example.2:.Adding.a.tie.to.a.set.of.ties - Extron electronics CrossPoint 450 Plus Series User Manual

Operation, cont'd
Example 2: Adding a tie to a set of ties
In the following example, a new video tie is added to the current configuration.
The steps show the front panel indications that result from your actions.
N This example assumes that you have performed example 1.
1.
2.
Press the RGBHV or Video button to toggle on and off.
3.
Press and release the Input 5 button.
The button lights green to indicate that RGBHV or
video outputs can be tied to or untied from this input.
1 2 3
17 18 19 20 21 22 23 24
4.
5.
3-16 CrossPoint 450 Plus and MAV Plus Switchers • Operation
Clear all selections: Press and release the Esc button.
Press the Esc button to clear all selections.
C O N T R O L
VIEW ESC
ENTER PRESET
The button flashes once.
Select video only for the tie: If necessary, press and release the RGBHV
(CrossPoint 450 Plus switchers) or Video (MAV Plus video switchers) button
and the Audio button.
VIDEO
The button lights green when selected.
Select an input: Press and release the input 5 button.
4 5 6 7 8 9
25
Select the output: Press and release the output 1 button.
Press and release the Output 1 button.
The button blinks green to indicate that only the selected RGBHV
or video input will be tied to this output.
1 2 3 4 5
17 18 19 20 21 22 23 24
Confirm the change: Press and release the Enter button.
I / O
AUDIO
Press the Audio button to toggle on and off.
The button is unlit or background illuminated when deselected.
The Output 3, Output 4, and Output 8 buttons light green to
indicate the RGBHV or video ties created in example 1.
I 1 2 3 4
N
P
U
17 18 19 20 21 22 23 24
T
I
S
N
6 7 8 9
25
O
U
T
5 6 7 8 9
25
O
U
T
C O N T R O L
VIEW ESC
ENTER PRESET
The Enter button blinks
to indicate the need to
confirm the change.