Extron electronics CrossPoint 450 Plus Series User Manual page 107

Command/response table for SIS commands (continued)
Command
Information requests (continued)
Request BME part number
Example:
N There are up to three separate sets of Extron firmware on which the switcher can report: the controller firmware, which
is the overall control firmware; the Ethernet protocol firmware, which handles the Ethernet interface; and the latest
optional Extron firmware update, which is available at www.extron.com.
Query firmware version
Example:
Query controller firmware
version (verbose)
Response description:
Example:
Description
1.23-0.14(0.20-64x64 Series -Wed, 22 Feb 2006 00:00:00 GMT)-0.25*(0.24-64x64 Series -Thu, 16 Mar 2006 16:39:21 GMT)
Response:
Ethernet protocol CrossPoint/MAV firmware version
firmware
Request system status
Response description:
+5V•+3.3V•+2.5V•Fan voltage•-5V•-12V•+12V•Temp•Fan1 RPM•Fan2 RPM•Primary PS•Secondary PS
Example:
N If one of the variables is not applicable to a BME (such as fans for a video BME), the response for that variable is "---".
X#
N = Power supply status
X2)
= Firmware version number to second decimal place (x.xx)
X2!
= Verbose firmware version-description-upload date/time
X2@
= Voltage
X2#
= Temperature
X2$
= Fan speed
CrossPoint 450 Plus and MAV Plus Switchers • Programmer's Guide
ASCII command Response
(host to switcher) (switcher to host)
N
nn-nnn-nn
N
60-768-41
X2)]
Q
Q
1.23
X2)
0Q
Ethernet protocol firmware version-controller firmware version-updated firmware version
0q
* indicates the version running
S
X2@
•
S
4.98•3.30•2.55•11.52•-5.21•-12.35•11.65•78.80•753•774•1•1
5V power system at 4.98V
0 = not OK
Positive or negative voltage and magnitude
Degrees Fahrenheit
RPM
Additional
description
]
See appendix B for numbers.
]
CrossPoint 450 Plus 6464
with front panel controller.
]
The factory-installed
controller firmware version
is 1.23 (sample value only).
X2! X2!]
Provide a detailed status
- -
of the Ethernet protocol
firmware, the controller
firmware, and any firmware
upgrade. The firmware that
is running is marked by
an asterisk (*). A caret (^)
indicates that the firmware
has a bad checksum or an
invalid load. ?.?? indicates
that firmware is not loaded.
Upload date and time
Updated firmware version
X2@ X2@ X2@ X2@ X2@ X2@
• • • • •
Fans receiving 11.52 V Secondary power supply is on and Ok
1 = OK
]
X2# X2$ X2$ X# X#]
• • • • •
]
Fan 1 rotating at 753 RPM
4-19