Connection - Bartec BCS36 8ex Series Supplementary Description

15.1.2

Connection

Diagram
Pos.
1
2
3
Wiring of HMI limiting cable – USB
RJ-50
PIN 1
PIN 10
B7-A2Z0-0041
B7-A2Z0-0054
Page 76 of 78
BCS36x8 Series
ex
Type 17-A1S4-*HP* and B7-A2S4-****
Description
Ex-HMI device
Note: The Ex-HMI device can be replaced by any other Ex device with serial interface.
Functional requirement: USB interface must supply 5V
It is important that the Ex-relevant data must be compatible with the BARTEC
components. See BARTEC User Manual Chapter: "Ex-relevant values when connected
to power supply module or other systems".
HMI limiting cable (B7-A2Z0-0041 or B7-A2Z0-0054)
BCS 3608 hand-held scanner
ex
HMI limiting cable, USB; 1.9m; plain
HMI limiting cable, USB; 4.5m; plain
Connection example
Cable diagram
/500 mA on the output side.
DC
Description
Red = V+
Black = GND
Green = D-
White = D+
Grey = Shield
Subject to technical changes.
05/2020