Setting/Programming - Bartec BCS36 8ex Series Supplementary Description

10.1.3

Setting/programming

The programming barcodes have been taken from the original Zebra Product Reference Guide (PRG).
The functions of the BCS3608
DS3678-HP/ER.
The Guide is available to download from Zebra or from BARTEC:
Zebra support download page:
https://www.zebra.com/us/en/support-downloads.html
- Barcode Scanners
- Ultra Rugged Scanners – DS3608-HP/DS3678-HP and DS3608-ER/DS3678-ER
BARTEC download page:
http://automation.bartec.de/indexE.htm
- Data capture
Set factory defaults
Scan the barcode for factory settings to remove all
customized defaults and set the digital scanner to factory
default settings (factory defaults can be found in the Zebra
PRG, Appendix A, Standard Default
Default settings
Unpairing
Delete all existing Bluetooth connections.
Prepare the scanner to pair with the universal supply
module.
Keyboard emulation (HID)
Scan in the "HID BT LE (Discoverable)" barcode.
Enables the host PC to set up an HID connection (Human
Interface Device) with the scanner via Bluetooth Low
Energy radio. The scanner can be detected on the host PC
(slave mode).
How to set up a connection (only for initial setup):
- Scan the barcode HID BT LE (Discoverable).
- Find the DS36xx in the Bluetooth Manager on your host
PC.
- Select your scanner and establish the connection.
Page 46 of 78
BCS36x8 Series Connection example
ex
Type 17-A1S4-*HP* and B7-A2S4-****
and BCS3678
ex
Function
Parameters).
are based on the Zebra DS3608-HP/ER and
ex
Barcode
Hand-held scanner is set as HID device.
Subject to technical changes.
05/2020