Setting/Programming - Bartec BCS36 8ex Series Supplementary Description

11.1.3

Setting/programming

The programming barcodes have been taken from the original Zebra Product Reference Guide (PRG).
The functions of the BCS3608
DS3678-HP/ER.
The Guide is available to download from Zebra or from BARTEC:
Zebra support download page:
https://www.zebra.com/us/en/support-downloads.html
- Barcode Scanners
- Ultra Rugged Scanners – DS3608-HP/DS3678-HP and DS3608-ER/DS3678-ER
BARTEC download page:
http://automation.bartec.de/indexE.htm
- Data capture
Set factory defaults
Scan the barcode for factory settings to remove all
customized defaults and set the digital scanner to factory
default settings (factory defaults can be found in the Zebra
PRG, Appendix A, Standard Default Parameters).
Default settings
Default settings of the RS232 interface (COM)
The hand-held scanner is set as HID device as default. The serial interface still needs to be
activated using a programming barcode.
Scan in the "Standard RS-232" barcode to activate the
serial RS232 interface.
Page 52 of 78
BCS36x8 Series Connection example
ex
Type 17-A1S4-*HP* and B7-A2S4-****
and BCS3678
ex
Function
are based on the Zebra DS3608-HP/ER and
ex
Barcode
Hand-held scanner is set as HID device.
RS-232 host parameters
Baud rate:
Parity:
Stop bits:
Data bits:
Hardware handshaking: None
Software handshaking:
9600 baud
None
1-bit
8-bit
None
Subject to technical changes.
05/2020