Supply Module Ex I With Bcs3608; Ex Hand-Held Scanner; Connection Usb Via Supply Module Ex I - Type: 17-A1Z0-0025 (E.g. On Ex-Hmi); Components Required - Bartec BCS36 8ex Series Supplementary Description

BCS36x8 Series Connection example
ex
Type 17-A1S4-*HP* and B7-A2S4-****
12.

Supply module Ex i with BCS3608

12.1 Connection USB via supply module Ex i - type: 17-A1Z0-0025
(e.g. on Ex-HMI)
12.1.1

Components required

Functional system
BCS3608
ex
ATEX / IECEx Zone 1/21
NEC / CEC Class I, II, III Division 1
1 x Wired BCS3608
Type: 17-A1S4-1HP0
1 x Supply module Ex i for hand-held scanners BCS3608
Only available for ATEX / IECEx Zone 1/21
Type: 17-A1Z0-0025
1 x Connection cable for connection between universal supply module and scanner
Type: 17-A1Z0-0015 or 17-A1Z0-0016 or 17-A1Z0-0017
To be provided by the customer
1 x USB connection cable to the host PC
Maximum cable length supported: 5 m
Number of cores and recommended cable cross section: see BARTEC User Manual
NB:
1 x – USB only functions as SPP (Serial Port Profile), HID is not supported.
– Please use standard, shielded data lines to prevent external disturbances.
1 x Ex-HMI with USB 2.0 or USB 3.0 interface
The Ex relevant data of the power supply module Ex i must match the Ex-relevant data of the
Ex-HMI or any other Ex device.
The Ex-relevant data of the BARTEC systems can be found in the corresponding Ex certificates,
user manuals and data sheets.
Terminal program or software keyboard wedge for testing virtual COM communication and data
1 x
transmission on the host PC.
Subject to technical changes.
05/2020
-IS
hand-held scanner
ex
The universal supply module is detected by the host PC as a serial connection (virtual
COM interface)
Recommendation: e.g. use CAT5, similar or higher quality cables
ex
ex
(www.bartec.com )
hand-held scanner
Page 55 of 78