Supply Module Ex I Bt With Bcs3678; Ex Hand-Held Scanner; Connection Rs232 Via Supply Module Ex I Bt - Type: 17-A1Z0-0028 (E.g. On Ex-Hmi); Components Required - Bartec BCS36 8ex Series Supplementary Description

BCS36x8 Series Connection example
ex
Type 17-A1S4-*HP* and B7-A2S4-****
13.

Supply module Ex i BT with BCS3678

scanner
13.1 Connection RS232 via supply module Ex i BT – type: 17-A1Z0-0028
(e.g. on Ex-HMI)
13.1.1

Components required

Functional system
BCS3678
ex
ATEX / IECEx Zone 1/21
NEC / CEC Class I, II, III Division 1
1 x Bluetooth BCS3678
Type: 17-A1S4-2HP1
1 x Supply module Ex i for hand-held scanner
ATEX / IECEx Zone 1/21
Type: 17-A1Z0-0028
To be provided by the customer
1 x RS232 connection cable to the host PC
Maximum cable length supported: 15m
Number of cores and recommended cable cross section: see BARTEC User Manual
NB:
1 x – The default setting for the hand-held scanner is as HID device. The serial
– Please use standard, shielded data lines to prevent external disturbances.
1 x Ex-HMI with serial (COM) interface
The Ex relevant data of the power supply module Ex i BT must match the Ex relevant data of the
Ex HMI or any other Ex device.
The Ex-relevant data of the BARTEC systems can be found in the corresponding Ex certificates,
user manuals and data sheets.
Terminal program or software keyboard wedge for testing virtual COM communication and data
1 x
transmission on the host PC.
Subject to technical changes.
05/2020
-IS
hand-held scanner
ex
interface still needs to be activated with the help of a programming barcode.
The universal supply module is then detected by the host PC as a series connection.
Recommendation: e.g. use CAT5, similar or higher quality cables
(www.bartec.com )
hand-held
ex
Page 61 of 78