14.
Supply module Ex i BT with BCS3678
scanner
14.1
Connection USB via supply module Ex i BT – type: 17-A1Z0-0028
(e.g. on Ex-HMI)
14.1.1
Components required
Functional system
BCS3678
ex
ATEX / IECEx Zone 1/21
NEC / CEC Class I, II, III Division 1
1 x
Bluetooth BCS3678
Type: 17-A1S4-2HP1
1 x
Supply module Ex i BT for hand-held scanners
ATEX / IECEx Zone 1/21
Type: 17-A1Z0-0028
To be provided by the customer
1 x USB connection cable to the host PC.
Maximum cable length supported: 5 m
Number of cores and recommended cable cross section: see BARTEC User Manual
NB:
1 x
– USB only functions as SPP (Serial Port Profile), HID is not supported.
– Please use standard, shielded data lines to prevent external disturbances.
1 x
Ex-HMI device with USB 2.0 or USB 3.0 interface
The Ex relevant data of the power supply module Ex i BT must match the Ex-relevant data of the
Ex- HMI or any other Ex device.
The Ex-relevant data of the BARTEC systems can be found in the corresponding Ex certificates,
user manuals and data sheets.
Terminal program or software keyboard wedge for testing virtual COM communication and data
1 x
transmission on the host PC.
Page 68 of 78
BCS36x8
Series
ex
Type 17-A1S4-*HP* and B7-A2S4-****
-IS
hand-held scanner
ex
The universal supply module is detected by the host PC as a serial connection (virtual
COM interface)
Recommendation: e.g. use CAT5, similar or higher quality cables
Connection example
(www.bartec.com
)
hand-held
ex
Subject to technical changes.
05/2020