System Connection Examples
Daisy-chain connection via analog or digital audio
Here is an example of multiple amplifiers connected in a daisy-chain via analog audio signals or digital audio sig-
nals (e.g., AES/EBU).
In the case of analog connection, daisy-chain the [THRU] jack and [IN] jack.
In the case of digital connection (the standard AES-IO card), daisy-chain the [THRU] jack and [IN] jack, or the
[OUT] jack and [IN] jack. The [THRU] jack will output the input signal without change, and the [OUT] jack will
output the signal with processing applied.
Mixer
In order to monitor and control the amplifiers from Amp Editor, use Ethernet cables to connect the computer to each amplifier.
This allows you to monitor and control all of the amps in the workspace from a single computer.
In the case of digital connections, you'll need to make word clock settings
CH 1/2 to be the master clock, or turn Auto Scan Mode on.
44
TX6n/5n/4n Reference Manual
Amp control
Analog audio
or
Digital audio
IN
TXn
Computer
Amp control
Network switch
Amp control
Analog audio
or
Digital audio
THRU/
OUT
IN
TXn
(page
20). Specify whether you want the slot's
Amp Editor
Amp control
Analog audio
or
Digital audio
THRU/
OUT
IN
TXn