Utility Screen; Device Setup - Yamaha TX4n Reference Manual

UTILITY Screen

Here you can make settings for the amplifier itself and for the network.
● Setting procedure
1.
In the HOME screen, press the second-from-left function button (UTILITY) to access the UTILITY screen.
2.
Use the function buttons (PREV/NEXT) to access the screen for the sub-category whose settings you want to
change.
3.
Use encoder A to move the cursor to the parameter that you want to edit, and encoder B to edit the parameter
value.
4.
If the parameter value is blinking, press the [ENTER] button to confirm the value.
Non-blinking parameter values are reflected by the amplifier in real time.

■ Device Setup

Here you can specify identifiers for distinguishing the amplifier on a network.
• You can also access this screen from the HOME screen by holding down the [ENTER] button for three seconds or longer.
NOTE
Parameter name
Device ID
Identify
Label
Range
0–255 This is an ID for uniquely identifying the device within a network.
ON/OFF Lights the [Identify] button of the corresponding amplifier in Amp Editor's
Tree View window.
— Displays the label (name) of this amplifier as assigned by Amp Editor.
Panel Operations
Explanation
TX6n/5n/4n Reference Manual
19