General - Yamaha TX4n Reference Manual

3.
Use encoder A to move the cursor to the parameter that you want to edit, and encoder B to edit the parameter
value.
4.
If the parameter value is blinking, press the [ENTER] button to confirm the value.
Non-blinking parameter values are reflected by the amplifier in real time.

■ General

Here you can make general settings for the amplifier, such as gain/input sensitivity and amp mode.
● Sensitivity/Amp Gain
Parameter name
Amp Gain
Sensitivity
Gain Mode
Standby/On
● Stereo/Bridge/Parallel
Parameter name
Amp Mode
● Attenuation Link
Parameter name
Att Link
Range
19.8–43.8 dB Specifies the gain of each channel. The gain and input sensitivity are
linked; you may edit either one.
TX6n: 24.0–0.0 dBu Specifies the input sensitivity of each channel. Since the maximum out-
TX5n: 22.6– -1.4 dBu put is different for each model, the settable range will differ for each
TX4n: 21.4– -2.6 dBu model. The gain and input sensitivity are linked; you may edit either
one.
Link ON/OFF Specifies whether the gain and input sensitivity settings will be linked
between channels.
Standby/On Switches the power between Standby and On modes. Standby is a
state in which the speaker output's power amp section is off (operation
other than speaker output will continue).
Range
Stereo The amplifier will operate in stereo, with channels A and B indepen-
dent.
Bridge The amplifier will operate as a monaural high-power amplifier that
bridge-connects the speaker output's power amp sections, with the out-
put signal from the channel A speaker processor as the source.
Parallel The amplifier will operate as a two-channel monaural amplifier, with the
output signal from the channel A speaker processor as the source.
Range
ON/OFF Specifies whether the attenuator settings will be linked between chan-
nels.
Panel Operations
Explanation
Explanation
Explanation
TX6n/5n/4n Reference Manual
25