Advertisement
@ SPEAKER CONNECTION
1. Peel off the insulation on the end of each speaker
cord by around 10 mm.
|
2. As shown in the illustration, insert the conductor of
the speaker into the terminal hole while pushing
the lever above it. After inserting, the code is
locked by releasing the lever.
Red: +
Black: —
The speaker cord distances should
be as short as possible.
* Take care for the polarity of connection. if it is inverse,
the reproduced sound will be unnatural, with lack of
stereo effect, sound localization on the center and
spoiled bass tones.
* Use speakers having the impedances within the
specified range.
* When connecting, be careful that the exposed speaker
conductor does not contact other terminals.
Rated Output
Minimum RMS output power per channel
2 CH (20 Hz ~ 20 kHz)
0.05% THD, 8 ohms
....... EEA
40W
0.06% THD, 6 ohms
........ RTO E CT:
43W
4 CH (20 Hz ~ 20 kHz)
0.07% THD, 8 ohms
....................
20W
0.08% THD, 6 ohms
....................
22W
Dynamic Power
2 CH (1 kHz, 8 ohms/6 ohms)
....... 57W/70W
4 CH (1 kHz, 8 ohms/6 ohms)
....... 32W/37W
Dynamic Headroom
2 CH (8 ohms) ................05. P
1.54 dB
4 CH (8 ohms) . . . .
2.2 .6...66s
cee ccs ev eee 2.04 dB
Power Bandwidth
2 CH (0.18% THD,
20W/8 ohms)
.................6- 10 Hz ~ 50 kHz
4 CH (0.18% THD,
10W/8 ohms)
................00- 10 Hz ~ 40 kHz
'Damping Factor (1 kHz, 8 ohms)
.............
70
Input Sensitivity/Input Impedance
2 OW PEE
EE
oe
aoe
1.0V/20 k-ohms
ACH
Gc. Acracaatesnases prestas
0.7V/20 k-ohms
Frequency Response
|
(20 Hz to 20 kHz) ..................
+0/-0.3 dB
Total Harmonic Distortion
2 CH (1 kHz, 20W/8 ohms) ............ .. 0.008%
4 CH (1 kHz, 10W/8 ohms) .............. 0.015%
Signal-to-Noise Ratio (IHF-A-Network, input
short-circuited)
|
2GCGH sheer
cee never
eee eee
120 dB
M-35
Residual noise (IHF-A-Network) ........... 18 pV
Channel Separation (1 kHz, Vol. — 30 dB,
5.1 k-ohms terminated)
|
POH
ved sahara a achietacn eu
a ia ... 70 0B
RO
EA
ee Pernt ter 55 dB
Rated Supply Consumption
......
AC 120V, 60 Hz
Rated Power Consumption
................
170W
AC Outlet (UNSWITCHED X 1) ....... 200W max.
Dimensions (W x H x D) ... 435 x 92.5 x 286.7 mm
(17-1/8" x 3-11/16" x 11-5/16")
Weight 2 bgp sc scdacpeuatcs AREE N
5.0 kg (11 Ib)
* Design and specifications subject to change
without notice.
Advertisement
