Meter Screen - Yamaha TX4n Reference Manual

Panel Operations

METER Screen

This shows the input/output levels of the audio signal, and the status of the power supply. As when you're in the
HOME screen, you can use encoders A/B to adjust the attenuation of each channel.
To access the METER screen, access the HOME screen and press the left-most function button (METER). You can
change the meter type by using the left-most function button (PREV) and right-most function button (NEXT).
q Level meter
This shows the name of the currently selected meter type and the meter for each channel. The "<" ">" beside the meter are
threshold values.
• When the input level from an analog input jack or slot exceeds the maximum value of digital signal, the top segment of
NOTE
the meter will light.
w Gain
This indicates the currently specified gain for each channel. The gain can be adjusted in the MENU screen
e Attenuation
This indicates the current attenuation for each channel. You can use encoders A/B to adjust the attenuation for each channel.
● Meter types that can be shown
The display units can be specified in the SETTING screen
Meter type
ANA INPUT VOLTAGE
SLOT INPUT VOLTAGE
SP OUTPUT VOLTAGE
SP OUTPUT POWER
SP OUTPUT IMPEDANCE
SLOT OUTPUT METER
THERMAL
16
TX6n/5n/4n Reference Manual
w
e q
(page
Display unit
dBFS, dBu, V Input level from the analog jack
dBFS Input level from the slot
dBu, V Speaker output level
W Speaker output power
Ω
Speaker output impedance
dBFS Slot output level
% Heat sink temperature of amplifier section
w
e
17).
Explanation
(page 24).