General Specifications - Yamaha C-5000 Owner's Manual

Rated output voltage/output impedance
(Input 200 mV, 20 Hz to 20 kHz, THD 0.01%)
BAL (BYPASS) . . . . . . . . . . . . . . . . . . 2 Vrms/150Ω
BAL (ATT. −6dB) . . . . . . . . . . . . . . . . 1 Vrms/150Ω
LINE 1/LINE 2 . . . . . . . . . . . . . . . . . . 1 Vrms/150Ω
LINE 2 OUT (recording) . . . . . . . 200 mVrms/1.2 kΩ
Maximum output voltage (1 kHz, THD 0.05%)
BAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Vrms
LINE 1/LINE 2 . . . . . . . . . . . . . . . . . . . . . . . 3 Vrms
LINE 2 OUT (recording) . . . . . . . . . . . . . . . . 3 Vrms
Input sensitivity/input impedance
BAL/LINE 1/LINE 2, 1 V
BAL 1/BAL 2 . . . . . . . . . . . . . . 200 mVrms/52 kΩ
TUNER/CD/LINE 1/LINE 2 IN
. . . . . . . . . . . . . . . . . . . . . . . 200 mVrms/47 kΩ
EXT .IN . . . . . . . . . . . . . . . . . . . . . . . 1 Vrms/20 kΩ
LINE 2 OUT (recording) (150 mV, 1 kHz)
PHONO (MC 300Ω) . . . . . . . . . 100 μVrms/300Ω
PHONO (MC 100Ω) . . . . . . . . . 100 μVrms/100Ω
PHONO (MC 30Ω) . . . . . . . . . . . 100 μVrms/30Ω
PHONO (MC 10Ω) . . . . . . . . . . . 100 μVrms/10Ω
PHONO (MM, XLR-type) . . . . . 2.5 mVrms/52 kΩ
PHONO (MM, RCA-type) . . . . 2.5 mVrms/47 kΩ
Maximum input signal voltage
LINE 2 OUT (recording) (1 kHz, THD 0.05%)
BAL (BYPASS) . . . . . . . . . . . . . . . . . . . . . . 2.8 Vrms
BAL (ATT. −6dB) . . . . . . . . . . . . . . . . . . . . 5.6 Vrms
TUNER/CD/LINE 1/LINE 2 IN . . . . . . . . . 2.8 Vrms
PHONO (MC) . . . . . . . . . . . . . . . . . . . . . . . 2 mVrms
PHONO (MM) . . . . . . . . . . . . . . . . . . . . . 50 mVrms
EXT .IN . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.6 Vrms
Frequency response (JEITA, load 22 kΩ)
10 Hz to 100 kHz . . . . . . . . . . . . . . . . . . . . +0/−3 dB
20 Hz to 20 kHz . . . . . . . . . . . . . . . . . . . +0/−0.3 dB
34

General specifications

Total harmonic distortion plus noise
(JEITA, input 0.5 V, 20 Hz to 20 kHz)
BAL 1/BAL 2/TUNER/CD/LINE 1/LINE 2 IN →
BAL/LINE 1/LINE 2 . . . . . . . . . . . . . . . . . 0 .0100%
PHONO (MC) → LINE 2 OUT (recording)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0 .0200%
PHONO (MM) → LINE 2 OUT (recording)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0 .0200%
Channel separation
(Input 1.0 kΩ terminated, 1 kHz/10 kHz, JEITA)
BAL 1/BAL 2/TUNER/CD/LINE 1/LINE 2 IN
. . . . . . . . . . . . . . . . . . . . . . . . . . . 110 dB or higher
PHONO (MC) . . . . . . . . . . . . . . . . . . 80 dB or higher
PHONO (MM) . . . . . . . . . . . . . . . . . 98 dB or higher
Function separation
(IHF-A network, input 1.0 kΩ terminated, JEITA)
BAL 1/BAL 2/TUNER/CD/LINE 1/LINE 2 IN
. . . . . . . . . . . . . . . . . . . . . . . . . . . 110 dB or higher
PHONO (MC) . . . . . . . . . . . . . . . . . . 75 dB or higher
PHONO (MM) . . . . . . . . . . . . . . . . . 95 dB or higher
Signal to noise ratio
(IHF-A network, input 1.0 kΩ terminated, JEITA)
BAL 1/BAL 2/TUNER/CD/LINE 1/LINE 2 IN
. . . . . . . . . . . . . . . . . . . . . . . . . . . 110 dB or higher
PHONO (MC 300Ω) . . . . . . . . . . . . . 80 dB or higher
PHONO (MM) . . . . . . . . . . . . . . . . . 98 dB or higher
Residual noise (IHF-A network)
BAL/LINE 1/LINE 2 . . . . . . . . . . . . . . . . . . . . 3 μV
Tone control characteristics
Bass
Boost/cut . . . . . . . . . . . . . . . . . . . . . . 30 Hz/±9 dB
Turnover frequency . . . . . . . . . . . . . . . . . . .350 Hz
Treble
Boost/cut . . . . . . . . . . . . . . . . . . . . . 20 kHz/±9 dB
Turnover frequency . . . . . . . . . . . . . . . . . . 3 .5 kHz