Utility Screen; Panel Setup; Panel Lock - Yamaha PX10 Reference Manual

Hide thumbs Also See for PX10:
Table of Contents

Advertisement

UTILITY screen

Sets up the status of PX amplifier, stores data to the USB flash drive, and loads data from the
USB flash drive.
 PANEL SETUP
Sets the front panel indication method.
q
w
q BRIGHTNESS
Sets the brightness of the back light of the display.
w BLACKOUT
(Advanced mode only)
If the panel is not operated for 10 seconds, the indication of the display turns off (black
out status).
NOTE
• Even if "BLACKOUT" is on, the [POWER], [ALERT], [PROTECT], and [LIMIT] indicators light
as usual.
• For the protection of the display, even if "BLACKOUT" is off, the display automatically turns
off if the PX amplifier has not been operated for 20 minutes. To turn on the display again,
simply press any key on the front panel or rotate the main knob.
 PANEL LOCK
Sets the panel lock not to operate the PX amplifier by mistake. At that time, a PIN code, 4-
digit identification number, can be set.
q
w
q PANEL LOCK
Locks the front panel (panel lock). There are three available settings.
• OFF: Panel lock is off.
• LCD: Locks operations for indications of the display. Operation of the volume knob
and muting are available.
• ALL: No operations, except for release of the panel lock, are available.
NOTE
• Refer to
"Panel Operation" – "Panel lock" (page 14)
lock.
• If a PIN code has been set, the PIN code must be entered even when the setting of the panel
lock is changed "OFF" to "LCD" or "ALL."
w PIN CODE
Sets a PIN code (any four digits) for the panel lock. Once a PIN code has been set, the
PIN code must be entered to release the panel lock.
NOTE
• If you have forgotten the PIN code, you will need to initialize the device to release the PIN
code. Refer to
"Initializing the PX amplifier" (page 35)
• In the initialized state, the PIN code is set to "0000." When the PIN code is set to "0000," the
PIN code input is not needed to release the panel lock.
Panel Operation — UTILITY screen
for instructions on releasing the panel
for instructions on initializing.
PX10/PX8/PX5/PX3 Reference Manual
32

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Px8Px5Px3

Table of Contents