Cellink BIO X EMD User Manual page 52

07 Maintenance
10. Repeat steps 7 to 8 with air instead of water/ethanol to dry the microvalve.
11. Disconnect the microvalve and let it air dry.
12. Connect the nozzle to the provided tube. Use the syringe to flush with water or ethanol, then water. Hold the nozzle tightly when flushing to
prevent it from disconnecting from the tube (Figure 27).
13. When the parts have dried, reassemble the printhead for storage (Section 4.2).
Figure 27: Connecting the nozzle for cleaning.
48