Cellink BIO X EMD User Manual page 22

04 Getting started
5. Insert the adapter tool into the printhead (Figure 7 A, D). Twist the tool counterclockwise while securing the printhead with your other hand
(Figure 7 B, E). Pull the tool out with the Luer lock attached (Figure 7 C, F).
A
D
18
B
E
C
F
Figure 7: Removing the
Luer lock adapter. (A, D)
Insert the removal tool
into the EMD printhead.
(B, E) Fit the Luer lock
and twist counterclock-
wise until loose. (C, F)
Pull out and remove the
adapter.