Cellink BIO X EMD User Manual page 10

02 Technical specifications
Table 1: Theoretical build volume based on nozzle length. Actual volume may vary based on build plate's thickness, size,
shape and level, as well as on cartridge position and tightness of the nozzle. X, Y and Z are measured from the front left
corner of the printbed.
Nozzle Type Tip
Length
Standard 4 mm
6
Nozzle/ Needle X
Length
4 mm 12.8 cm
Y Z Build Volume
702.2 cm 3
8.5 cm 6.5 cm