WEISS ROBOTICS GRIPKIT CR PLUS Instruction Manual page 39

12.2.2 Gripper configuration option B
To configure your gripper module, you can alternatively use the "Device Configurator"
program. You will find this program on the enclosed USB flash drive. Do the installation
on a desktop device and open the program. Connect the Gripper to your computer
with the enclosed USB cable.
CRG 30-050 V0.00 SN 000000 MADE IN GERMANY
° ° °
www.weiss-robo�cs.com
Start the "Device Configurator" program and connect the gripper via "Connect".
1
14