Neat D-SERVER Technical Handbook page 86

neat
In this scenario, we want to make a pause between the alarm and that the phones
start ringing. To prepare the pause a Delay destination is created. Go to
Destinations
> .
Delay destinations
Picture 121. Add delay destinations
A D-CALL destination is only a preparation. Go to >
Destinations D-CALL destinations
to create a specific destination for Apartment 1. If the scenario had contained more
apartments, a destination must be created for each Apartment.
Picture 122. Add D-CALL destinations
As we want the D-SERVER to send a SIP message (alarm) to our DECT phones we need
to create a D-SERVER SIP account.
Go to > to create an account.
SIP SIP accounts
Picture 123. Create SIP accounts
Note that 10.40.10.180 is referring to the D-SERVER in this example. You need to con-
figure the IP address corresponding to your D-SERVER IP!
86
D-SERVER Technical Handbook
NE41 09010-02 v3.0