Neat D-SERVER Technical Handbook page 69

12. The last step in the D-SERVER configuration is to change System ID to something
else. This step is optional but recommended if you have several D-SERVERs run-
ning in your environment. Go to System settings > System parameters
and change the parameter system-id to 4000.
Picture 82. Set the D-SERVER System ID
13. Click Reload configuration to enable the configuration.
Note that the red "Reload the configuration to activate changes" disappears when the
configuration is activated.
Picture 83. Reload the configuration notification
NE41 09010-02 v3.0 D-SERVER Technical Handbook
neat
69