Neat D-SERVER Technical Handbook page 79

neat
To get this scenario working we also need to configure the D-SERVER and our D-TREX
2G units.
Let's begin with the D-SERVER configuration.
D-SERVER configuration
Here's a brief overview of the D-SERVER configuration. Please note that the configu-
ration is identical to Scenario 1 but the System ID have changed.
If you are starting with an empty D-SERVER configuration but did a D-SERVER backup
of Scenario 1, you do not need to configure the D-SERVER from scratch. Just restore
Scenario 1 (see 4.2.1), change the System ID and reload the configuration.
The following screenshots is a re-cap and follows the same steps as for Scenario I.
Picture 103. Add user(s)
Picture 104. Add personnel
Picture 105. Add device(s)
79
NE41 09010-02 v3.0 D-SERVER Technical Handbook