Neat D-SERVER Technical Handbook page 73

Modification #1 of Scenario I
It's quite common that the personnel wants to do presence/ready against the alarm
button. To support this feature the SMILE-STD must be replaced with a SMILE-ID.
This feature only works with D-ATOM and SMILE-ID as they have RFID functionality.
The existing D-SERVER configuration is used but with some minor modifications.
1. Replace SMILE-STD (101E) with a SMILE-ID. The SMILE-ID in this example has radio
code 28AD.
Go to
Entities
Picture 92. Change/add a SMILE-ID
2. Go to
System settings
indication-enabled and feature-rfid-reception-enabled by setting
its values to 1.
Picture 93. Enable presence and RFID functionality in the D-SERVER system
3. Reload the configuration.
4. Restart the D-Server application.
Picture 94. Restart the D-SERVER application
NE41 09010-02 v3.0
> and change the SMILE-STD to a SMILE-ID.
Devices
>
System parameters
and enable feature-presence-
D-SERVER Technical Handbook
neat
73