Neat D-SERVER Technical Handbook page 74

neat
Testing presence/ready against a SMILE-ID button
Place the D-TREX2G close to the SMILE-ID.
Picture 95. EN
Press and hold the green button on D-TREX2G until the presence message is
Return
displayed. Press the green again to close the message and return to the main
Return
screen.
Picture 96. EN
Press the green button again to end presence and indicate Ready. Press the
Return
green button again to close the message and return to the main screen.
Return
Picture 97. Ready indication in D-TREX2G
If you have trouble getting the solution to work, please check that the RFID is enabled
on the SMILE-ID.
74
D-SERVER Technical Handbook
NE41 09010-02 v3.0