Neat D-SERVER Technical Handbook page 78

neat
D-TECT IP configuration
The D-TECT IP devices are pre-configured with a static IP (192.168.0.1) so it is impor-
tant to connect one device at a time. Once you have connected a device you need to
review Network and Server Settings.
The D-TECT Server IP address must to be changed so it matches the D-SERVER IP ad-
dress. The same goes for Server ID (System ID).
As mentioned above the System ID is set to 4321.
Picture 102. EN
Connected devices also displays if you have any D-TECT, D-CALL or a CMS connected
to the D-SERVER.
78
D-SERVER Technical Handbook
NE41 09010-02 v3.0