Neat D-SERVER Technical Handbook page 77

: Q Will you use day and night shifts? Then you need to know when the day and night
shifts starts.
9 Day shift starts 07:00 AM :
9 Night shift starts 09:00 PM :
Before connecting the D-TECT IP units, a D-SERVER System ID must to be set. The
default System ID is set to 1, but in this scenario the System ID 4321 is used.
Go to
System settings
Picture 101. Set the System ID
Don't forget to reload the configuration after the System ID is changed.
NE41 09010-02 v3.0
>
System parameters
to configure System ID.
D-SERVER Technical Handbook
neat
77