Neat D-SERVER Technical Handbook page 64

neat
64
D-SERVER Technical Handbook
: Q Do you have an idea how many groups you need for the nursing home? Will the
nurses work in shift? Day and Night? Then you need at least two groups for the
nurses and at least one for devices.
9 We need two personnel groups because the nurses will work in shift. :
9 Personnel Day :
9 Personnel Night :
9 Since we only have one SMILE-STD in this scenario, one device group is enough :
- Misc alarm sources
: Q Will you use day and night shifts? Then you need to know when the day and night
shifts starts.
9 Day shift starts 07:00 AM :
9 Night shift starts 09:00 PM :
Scenario I requires D-SERVER, D-TECT and D-TREX 2G configuration. Let's start with
the D-TECT configuration, thereafter the D-SERVER and finally D-TREX 2G.
D-TECT configuration
Read both D-TECTs configuration and change
Picture 71. Change the D-TECT configuration
D-TECT configuration requires a NPU and D-TECT Programmer.
D-SERVER configuration
1. Open the D-SERVER administrator web interface.
2. Go to
Identifications
our scenario, there is only one user: Matthew Parker.
Send acknowledge
> to add the users who will stay at the nursing home. In
Users
to .
No/Function off
NE41 09010-02 v3.0