Neat D-SERVER Technical Handbook page 113

To open and scroll through the whole ip-transmission log, type the following
command:
pico ip-transmission-2017-06.30.log
The log file will open in the built in text editor Pico:
Replace the date in the command so it matches a today's date.
Picture 178. Open a log file with the pico command
Picture 179. Content of the opened log file
To exit the log press
Besides tail -f and pico, the following commands can be useful:
cd /home/sysadm/bin rwmount rw
lsusb
iconv --l
ntpq -nc peers
cat /sys/block/mmcblk0/device/name
Table 49. Other useful commands in Bitvise xterm
NE41 09010-02 v3.0
.
Ctrl + X
File System: Disable read-only mode
List connected USB devices
List known coded character sets
NTP: Servers currently used
Memory card manufacturer installed
D-SERVER Technical Handbook
neat
113