Communication
2.3 Modbus RTU Master
2.3
Modbus RTU Master
2.3.1
Functions and Properties for Modbus RTU Master
Schematic Overview of the Functioning of the Modbus RTU Master
---------------------------------------------------------------------------------------------
Measured values MV x Slv 1 from Modbus slave device 1
Measured values MV x Slv 2 from Modbus slave device 2
...
...
Measured values MV x Slv 8 from Modbus slave device 8
(x = 1 to 15)
Indications Indication y Slv 1 from Modbus slave device 1
Indications Indication y Slv 2 from Modbus slave device 2
...
...
Indications Indication y Slv 8 from Modbus slave device 8
(y = 1 to 6)
Figure 2-8
Supported Modbus Register Sets
•
Coil status registers (0x references, read only)
•
Input status registers (1x references, read only)
•
Input registers (3x references, read only)
•
Holding registers (4x references, read only)
86
Device type: SCADA
Device name: SCADA PCx
Ethernet
Modbus TCP
Ethernet
Switch
Device type: SICAM Q100
Device name: Q100_1
Data object image
RS485:
Modbus Master
Modbus RTU
RS485:
Modbus Slave
RS485:
Modbus Slave
Functioning of the Modbus RTU Master
Modbus TCP
Ethernet connection
to further device
combinations of the
same type
SICAM Q100, 7KG95xx, System Manual
E50417-C1040-C522-A8, Edition 09.2020