Table of Contents
Advertisement
The EASTWOOD 42" BELT & 6" DISC SANDER is designed for rugged reliability and ease of use. The positionable belt drive assembly provides a full 85° of
adjustment from horizontal to vertical and features a secure stop fence/tool rest for safety and convenience. The 6" disc sander features an angle-adjustable
work surface and sliding miter gauge/fence to allow grinding to precise angles with one convenient bench mounted tool.
CONTENTS
(1) Belt/Disc Sander
(1) Abrasive Belt (installed)
(1) Abrasive Disc
(1) Belt Table
(1) Small Belt Table
(1) Disc Table
(1) Miter Gauge Assembly
(2) M6 x 1.00 Threaded Knobs
(2) M6 Washers
(1) M10 x 1.5 Socket Head Cap Screw.
(1) M10 Washer
(1) Eastwood Instruction Manual
(1) 8mm/19mm Combination Flat Wrench
(1) 5mm Hex Key
(1) 6mm Hex Key
(1) 8mm Hex Key
SPECIFICATIONS
Input Voltage:
120 VAC, 60 Hz
Motor Size:
1/2 HP
Plug Type:
NEMA 5-15P
Cord Length:
6' [1.8m]
Free Speed:
3590 RPM
Belt Speed:
4130 FPM
Belt Size:
2" x 42"
Disc Size:
6" Adhesive Backed
SAFETY INFORMATION
The following explanations are displayed in this manual, on the labeling, and on all other information provided with this product:
DANGER indicates a hazardous situation which, if not avoided, will result in death or serious injury.
WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION used with the safety alert symbol, indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
NOTICE is used to address practices not related to personal injury.
2
Eastwood Technical Assistance: 800.343.9353 >> tech@eastwood.com
Advertisement
Table of Contents
