Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Eastwood 31455
Summary of Contents for Eastwood 31455
- Page 1 Part #31455 1/2" X 18" PROFESSIONAL MINI BELT SANDER INSTRUCTIONS...
-
Page 2: Specifications
The EASTWOOD MINI BELT SANDER is a professional quality tool ruggedly designed for many years of reliable service. It features an infinitely adjustable sanding arm through a 120° range of belt position for maximum versatility and a generous 8-1/2” long Abrasive Arm allows reach into confined spaces. -
Page 3: Safety Information
• Handling sharp metal can cause cuts. Wear thick work gloves and long sleeves when using this tool. EXPLOSION HAZARD! • Do not exceed 90 psi (6.3 bar) of tool inlet pressure. Permanent tool damage and/or explosion could occur and cause personal injury. To order parts and supplies: 800.345.1178 >> eastwood.com... -
Page 4: Setup And Connection
• Always maintain a firm grip while operating tool, do not force but allow the rotational speed of the Abrasive Belt to do the work. • Be sure that the workpiece is clamped down or held securely to minimize the danger of injury while operating tool. Eastwood Technical Assistance: 800.544.5118 >> techelp@eastwood.com... -
Page 5: Abrasive Belt Replacement
Belt is slid fully over the Guide Bar located on the upper surface of the Abrasive Belt Arm. 5. Depress the Thumb-Lever Latch to release the Guide Pin restoring full spring pressure. To order parts and supplies: 800.345.1178 >> eastwood.com... - Page 6 2. Using the included 1.5mm Hex Key, turning the screw clockwise (as viewed from the right side) will cause the belt to track left while turning the screw counter-clockwise will cause the belt to track right. Eastwood Technical Assistance: 800.544.5118 >> techelp@eastwood.com...
-
Page 7: Maintenance
Loose Angle STOP USE IMMEDIATELY! During Use Adjustment Tighten Angle Adjustment Screw Screw Tool Emits Excessive Tool Lacks STOP USE IMMEDIATELY! Noise During Add air tool oil directly to air inlet. Lubrication To order parts and supplies: 800.345.1178 >> eastwood.com... -
Page 8: Additional Items
5 Pack of 120 Grit, 1/2” x 18” Abrasive Belts If you have any questions about the use of this product, please contact The Eastwood Technical Assistance Service Department: 800.544.5118 >> email: techelp@eastwood.com PDF version of this manual is available online >> eastwood.com/31455manual The Eastwood Company 263 Shoemaker Road, Pottstown, PA 19464, USA US and Canada: 800.345.1178 Outside US: 610.718.8335...