Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Eastwood 31294
Summary of Contents for Eastwood 31294
- Page 1 Part #31294 5” WET JITTERBUG SANDER INSTRUCTIONS...
-
Page 2: Specifications
• For best results, a compressor capable of providing a minimum of 9 CFM @ 90 PSI is required. Less available CFM will negatively affect the performance of the Sander and may overwork the compressor. Eastwood Technical Assistance: 800.544.5118 >> techelp@eastwood.com... -
Page 3: Safety Information
• INJURY HAZARD Keep loose clothing, jewelry and long hair away from rotating components as serious personal injury can occur. • INJURY HAZARD Always make sure the workpiece being sanded is securely clamped or anchored to allow safe operation of the Sander. To order parts and supplies: 800.345.1178 >> eastwood.com... -
Page 4: Explosion Hazard
Use ANSI approved safety glasses. Everyday eyeglasses are NOT safety glasses. • TRIP HAZARD Air and water lines connected to the Sander can become tripping hazards. Keep all air and water lines out of walking path while working. Eastwood Technical Assistance: 800.544.5118 >> techelp@eastwood.com... -
Page 5: Setup And Connection
1. Wrap white thread sealing tape (not included) around the threads of the 1/4" Male NPT Air Inlet of the Sander Body. Then thread the 1/4” Female NPT Quick Disconnect Fitting (included), onto the inlet threads of the Sander Body (FIG 1). 2. Attach Air Supply to Inlet Fitting. To order parts and supplies: 800.345.1178 >> eastwood.com... -
Page 6: Operation
To increase speed limitation; rotate knob “Clockwise” as viewed from above (FIG 3). To Speed reduce speed limitation; rotate knob Limiting “Counter-clockwise” as viewed from Control top of tool body. Eastwood Technical Assistance: 800.544.5118 >> techelp@eastwood.com... -
Page 7: Maintenance
Lack of Excessive or Stop use immediately, remove Oil Fill Screw and lubrication Unusual Noise add a quality Air Tool Oil until an oil level is seen. in air motor During Use To order parts and supplies: 800.345.1178 >> eastwood.com... -
Page 8: Additional Items
1000 Grit 5” Wet Jitterbug Sandpaper If you have any questions about the use of this product, please contact The Eastwood Technical Assistance Service Department: 800.544.5118 >> email: techelp@eastwood.com PDF version of this manual is available online >> eastwood.com/31294manual The Eastwood Company 263 Shoemaker Road, Pottstown, PA 19464, USA US and Canada: 800.345.1178 Outside US: 610.718.8335...