• Polishing difficult to reach surfaces to a high shine. • #21631 22” Tumbler bowl and lid assembly • Rapid parts degreasing using Eastwood Metal Wash (10120). • All necessary bowl attachment hardware • Complete instructions IMPORTANT HEALTH AND SAFETY CAUTIONS Please read all information and follow directions carefully.
Page 3
Eastwood DEKOTE paint stripper (#10410) Qt., (#10411) they should check to make sure the maximum 50 lbs total weight hasn’t Gal., XXX Finish Stripper (#21658Z) Aerosol, (#21659ZP) Qt., or Eastwood been exceeded. Reduce weight if needed. To further adjust tumbler action: Powdercoat and Paint Dissolver (#12849) Qt., (#12850) Gal.
3. Continue to use all medias until they become a useless dust as the abrasive/polishing treatments permeate the entire cross section. Protect the shine with Eastwood Diamond Clear for Bare Metal (#10200Z Aerosol; #10357ZP Quart; #29894Z Extreme Diamond Clear, 8 oz.) or the Eastwood Tin-Zinc Electroplating System (#10049Z).
Page 5
Powder Coating System ® complete range of To produce the most durable chip resistant finish available. ® HotCoat colors www.eastwood.com If you have any questions about the use of this product, please contact The Eastwood Technical Assistance Service Department 1-866-759-2131 email: techelp@eastwood.com...