Table of Contents
Advertisement
The 5" WET JITTERBUG SANDER is a heavy-duty professional quality tool designed for many years
of reliable service. It features a high-efficiency sealed ball bearing drive assembly for smooth, low
vibration operation and long life. The precision diecast housing provides a solid foundation and offers
ergonomic, one handed operation with speed controlled by an infinitely variable hand paddle and
rotary knob speed limiting control.
CONTENTS
(1) Jitterbug Wet Sanding Tool
(1) 4mm Hex Key Wrench
(1) 1/4" Male Quick
Disconnect Fitting
(1) Water Hose
(1) Water Pickup Assembly
SPECIFICATIONS
Replacement Sanding Disk: 5" [127mm] Hook and Loop type
RPM:
Orbit Size:
Minimum Air Consumption: 7.1 CFM [201 lm]
Air Inlet Thread Size
Water Hose Length:
REQUIRED FOR USE
• The inlet air supply must have a moisture separator capable of removing all moisture and
impurities from the air supply. Moisture and/or oil in the air supply will cause poor tool
performance and damage.
• A suitable regulator must be used to limit incoming air pressure to 90 PSI maximum.
Excessive air pressure can cause permanent damage to the unit and possible serious
personal injury from bursting.
• For best results, a compressor capable of providing a minimum of 9 CFM @ 90 PSI is
required. Less available CFM will negatively affect the performance of the Sander and
may overwork the compressor.
2
8,000 free speed
3/32" [2.4mm]
1/4" MNPT
13 feet [4 meters]
Eastwood Technical Assistance: 800.544.5118 >> techelp@eastwood.com
Advertisement
Table of Contents
