Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Eastwood 21535
Summary of Contents for Eastwood 21535
- Page 1 Part #21535 12" DISC SANDER INSTRUCTIONS...
-
Page 2: Specifications
Your EASTWOOD 12” DISC SANDER was designed with a powerful 8-amp motor and a large, 12” diameter Backing Disc. It features quick-release, angle adjustable Platen Table clamps with a precise angle-adjustable, Miter Fence adjustment. Easy access Backing Disc surface to allow quick Abrasive Disc changes. -
Page 3: Important Safety Information
When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock. To order parts and supplies: 800.345.1178 >> eastwood.com... - Page 4 Use of the power tool for operations different from those intended could result in a hazardous situation. Eastwood Technical Assistance: 800.544.5118 >> techelp@eastwood.com...
-
Page 5: Additional Safety Information
• This Sander will eject a trail of sparks at high speed which can ignite flammable materials or injure others nearby. Do not operate in the vicinity of flammable materials and keep all persons and pets away from the work area. To order parts and supplies: 800.345.1178 >> eastwood.com... - Page 6 INSTALL PLUNGER BRAKE [F] TO SANDER HOUSING [A] • Locate the Plunger Brake [F] in the recess at the top of Housing casting and thread into place with 2 Phillips Head Screws [G] (Fig 3). FIG. 3 Eastwood Technical Assistance: 800.544.5118 >> techelp@eastwood.com...
-
Page 7: Set Up For Use
• Secure work pieces by using the Miter Fence to prevent movement while sanding. • The Sander Housing features a 2” O.D. outlet port suitable for connection to a an industrial vacuum cleaner (not Included). To order parts and supplies: 800.345.1178 >> eastwood.com... - Page 8 • Plug the Power Cord into the nearest 120 V~, grounded, 20 Amp electrical outlet. Be sure the power cord is away from and out from under the Grinding Disk. FIG. 7 FIG. 8 Eastwood Technical Assistance: 800.544.5118 >> techelp@eastwood.com...
- Page 9 Sander! • The Plunger Brake is intended to stop the rotating Disc immediately. To do so, push down firmly on the spring-loaded plunger to engage the Brake (FIGS 10 & 11). To order parts and supplies: 800.345.1178 >> eastwood.com...
-
Page 10: Maintenance
• Check tightness of all hardware. • Check operation and alignment of Platen Table. • Inspect Abrasive Disk for tears, damage or premature wear. • Clean dirt and debris from Sander motor air cooling slots. Eastwood Technical Assistance: 800.544.5118 >> techelp@eastwood.com... -
Page 11: Troubleshooting
Allow Disk to cut by rotation alone. Do Not Force. sanding or grinding Motor Overheats Dirt and cutting debris buildup Use a brush or compressed air to remove debris. in motor cool- ing air slots To order parts and supplies: 800.345.1178 >> eastwood.com... -
Page 12: Additional Items
12" PSA Aluminum Oxide, 240 Grit If you have any questions about the use of this product, please contact The Eastwood Technical Assistance Service Department: 800.343.9353 >> email: techelp@eastwood.com PDF version of this manual is available at eastwood.com The Eastwood Company 263 Shoemaker Road, Pottstown, PA 19464, USA 800.343.9353 eastwood.com...