The EASTWOOD PISTOL GRIP 3” COMPOSITE ORBITAL SANDER design incorporates the latest composite construction for high strength, low vibration and high performance. It features an efficient Dual-Action motion arbor to multiply sanding action. A high-performance, 5-vane, ball bearing air motor provide smooth operation and long life. Speed is conveniently controlled with an infinitely adjustable speed setting and throttled trigger control.
Page 3
Backing Pads rated for 18,000 RPM or greater use otherwise severe injury or death can result in the event of Pad failure. VIBRATION INJURY HAZARD! • This tool will vibrate during use! Repeated exposure to vibration may cause physical injury. To order parts and supplies: 800.343.9353 >> eastwood.com...
Page 4
• Be sure that the air supply to the tool is clean and dry. Moisture in the supply line will quickly damage the motor and valves. • A minimum 3/8” I.D. air line should be used for optimal performance. Eastwood Technical Assistance: 800.343.9353 >> techelp@eastwood.com...
Stop use immediately, check for and replace damaged Tool vibrates damaged Backing Pad or Sanding Discs. Backing Pad or excessively Sanding Discs during use Loose Backing Tighten loose Backing Pad. To order parts and supplies: 800.343.9353 >> eastwood.com...
3” Replacement Hook & Loop Backing Pad (5/16”-24 Arbor) If you have any questions about the use of this product, please contact The Eastwood Technical Assistance Service Department: 800.343.9353 >> email: techelp@eastwood.com PDF version of this manual is available at eastwood.com The Eastwood Company 263 Shoemaker Road, Pottstown, PA 19464, USA 800.343.9353 eastwood.com...