Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Eastwood 31672
Summary of Contents for Eastwood 31672
- Page 1 Item #31672 ELECTRIC 1/2" MINI BELT SANDER INSTRUCTIONS...
-
Page 2: Specifications
The EASTWOOD ELECTRIC 1/2" MINI BELT SANDER is great for fi ne sanding and grinding jobs on virtually all metals including steel, aluminum, brass and more. Uses common 1/2" x 18" abrasive belts for convenience. The compact design allows access to tight places where larger Belt Sanders can’t go. -
Page 3: General Safety Rules
When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock. NOTE: Use a minimum 14 gauge insulated cord, no longer than 25’ in length. To order parts and supplies: 800.343.9353 >> eastwood.com... -
Page 4: Personal Safety
5) SERVICE a) Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. Eastwood Technical Assistance: 800.343.9353 >> techelp@eastwood.com... -
Page 5: Additional Safety Information
• This Sander will eject a trail of sparks at high speed which can ignite flammable materials or injure others nearby. Do not operate in the vicinity of flammable materials and keep all persons and pets away from the work area. To order parts and supplies: 800.343.9353 >> eastwood.com... -
Page 6: Operation
ON/OFF Switch The switch can be locked in the “on” position by depressing the front of the switch while sliding it forward. Tap the rear of the switch to unlock and turn off the sander. Eastwood Technical Assistance: 800.343.9353 >> techelp@eastwood.com... - Page 7 (Fig 3). • Rotate the Abrasive Belt Tensioner Lever 90° Counter- Clockwise to release tension on Belt (Fig 4). • Pull out Abrasive Belt (Fig 5). FIG. 4 Rotate 90° FIG. 5 To order parts and supplies: 800.343.9353 >> eastwood.com...
-
Page 8: Abrasive Belt Installation
FIG. 6 Belt Tension Lever Tracking Knob ABRASIVE BELT TRACKING ADJUSTMENT • Rotate the Belt Tracking Knob located on the right side of the Arm (Fig 6) Counter-Clockwise to track left; Clockwise to track right. Eastwood Technical Assistance: 800.343.9353 >> techelp@eastwood.com... -
Page 9: Maintenance
IMPORTANT NOTE: The following maintenance should be performed before each use: • Inspect Abrasive Belt for cracks, damage or premature wear. • Clean dirt and debris from motor air cooling slots. • Clean dirt and debris from Abrasive Belt Mounting Shaft. To order parts and supplies: 800.343.9353 >> eastwood.com... -
Page 10: Troubleshooting
Allow Allow the tool to do the work. Do Not force! Applied to Abrasive Belt Motor Overheats Dirt and Debris Buildup in Use a brush or compressed air to remove debris. Motor Cooling Air Slots Eastwood Technical Assistance: 800.343.9353 >> techelp@eastwood.com... - Page 11 To order parts and supplies: 800.343.9353 >> eastwood.com...
-
Page 12: Additional Items
(5) 120 Grit Abrasive Belt If you have any questions about the use of this product, please contact The Eastwood Technical Assistance Service Department: 800.343.9353 >> email: techelp@eastwood.com PDF version of this manual is available online >> eastwood.com/31672manual The Eastwood Company 263 Shoemaker Road, Pottstown, PA 19464, USA US and Canada: 800.343.9353 Outside US: 610.718.8335...