Table of Contents
Advertisement
2.1.3 MM2000RX Rack Mounted PC Card Controller
Existing MM2000RX controllers are incompatible with the 850G. Factory
upgrades may be done on a special request basis. New MM2000RX
controllers may be purchased to be compatible with the 850G on a special
request basis. Please call Newport for the latest information.
2.1.4 MM3000 Motion Controller/Driver
The MM3000 is completely compatible with the 850G Series actuators. All
that is required is to configure the controller with the proper driver card
and adjust the servo parameters per the specifications included in the
controller documentation.
2.1.5 MM4000/4005 Motion Controller
The MM4000/4005 are completely compatible with the 850G Series
actuators. All that is required is to configure the controller with the proper
driver card and adjust the servo parameters per the specifications
included in the controller documentation.
2.1.6 PMC100 Single Axis Controller
Existing PMC100 controllers are incompatible with 850G Series actuators.
Please call Newport for the latest information regarding upgrades for the
PMC100.
2.1.7 PMC200/PMC200-P Dual Axis Controller
PMC200 Series Controllers using version 3.1 or earlier firmware are
incompatible with 850G Series actuators and require an upgrade. The
firmware version is displayed on power up. Please call Newport for the
latest information regarding upgrades. PMC200 Series Controllers using
version 4.0 or later are compatible with the 850G Series actuators and
include the proper interface to handle the limit switches and manual knob.
Servo parameters may be set selecting type 850G in the controller setup
menu. There is also a menu to toggle motor power off for manual
positioning. An adapter cable (P/N 21731-01) must be ordered for each
850G actuator.
4
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Hide quick links:
Advertisement
Table of Contents
