Oracle Sun Fire X4170 M2 Product Notes page 18

Table of Contents

Advertisement

Important – Install Latest OS Updates, Patches, and Firmware
Oracle ILOM Enhancement Allows Enabling IPv4 only, IPv6
only, or Dual Stack
Oracle ILOM's standard network connectivity features support the ability to configure an
IPv4 network connection or a dual-stack (IPv4 and IPv6) network connection. Oracle ILOM's
enhanced network connectivity properties support the ability to configure a static IPv6 gateway
address and any of the following type of network connections: IPv4 only, IPv6 only, or dual-
stack (IPv4 and IPv6 enabled).
The following web and command-line interface (CLI) instructions provide details for viewing
and modifying the network settings that are assigned to the SP.
To modify the SP network settings from the Oracle ILOM web interface, do the following:
1. Log in to Oracle ILOM as an Administrator.
2. Click ILOM Administration > Connectivity > Network.
3. Modify the settings on the Network Settings page as required.
For further details about how to configure the properties on the Network Settings page,
click the More Details link.
4. Click Save to save your network property changes in Oracle ILOM.
Note -
property changes. To log back in to Oracle ILOM, use the newly assigned service processor
IP address.
To modify the SP network settings from the Oracle ILOM CLI, do the following:
1. Log in to Oracle ILOM as an Administrator.
2. To view the assigned IPv4 and IPv6 network settings on the SP, perform the following:
For IPv4, type:
For IPv6, type:
3. To view the descriptions about each IPv4 and IPv6 network property, perform the
following:
For IPv4, type:
For IPv6, type:
4. To modify the IPv4 and IPv6 network properties on the SP, issue the set command.
IPv4 Example:
set /SP/network state=enabled|ipv4-only|ipv6-only|disabled pendingipdiscovery=static|
dhcp pendingipaddress=value pendingipgateway=value pendingipnetmask=value
18
Sun Fire X4170 M2 and X4270 M2 Servers Product Notes • July 2018
All user sessions on the SP are terminated upon modifying and saving IP network
show /SP/network
show /SP/network/ipv6
help /SP/network
help /SP/network/ipv6

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Sun Fire X4170 M2 and is the answer not in the manual?

Questions and answers

This manual is also suitable for:

Sun fire x4270 m2

Table of Contents