Part Copy - Yamaha Artiste AR-80 Electone Owner's Manual

Part Copy

The Copy function allows you to copy the data from a specified range of measures in the part to
another measure(s) in the part.
To copy the data of a part:
1.
Set the TOP and LAST measures.
The "up" Data Control button increases the value, the "down" button decreases it. These
settings determine the length of the phrase to be copied. (Phrase length is automatically limited
by the actual length of the Style section itself.)
2.
Set the DEST (Destination) measure.
This determines the measure number to which the phrase is to be copied.
3.
Select EXEC (Execute) to copy the data.
At the prompt, select "OK" to copy the data, or "Cancel" to abort the operation.
DATA CONTROL
137