Custom Voice Edit; Engaging The Easy/Full Edit Mode; Exiting - Yamaha PortaTone PSR-7000 Owner's Manual

Custom Voice Edit

eters of the preset voices. Wave data loaded from disk can also be edited to
create original voices.* A simple EASY EDIT mode and full-parameter FULL
EDIT mode are available. Both modes can be used to customize voice data
loaded from disk. Up to 32 custom voices can be retained in memory and se-
lected via the RIGHT 1, RIGHT 2, LEFT, and LEAD voice [CUSTOM] buttons.
* The wave data loaded automatically when the data disk supplied with the PSR-7000 is inserted (see page
96) is loaded into the CUSTOM VOICE memory. These custom voices can then be saved to a different
disk using the SAVE TO DISK function (page 98), reloaded, and edited as required to create original
voices.
Z
Engage the CUSTOM VOICE EDIT Mode
Press the [CUSTOM VOICE EDIT] button to
engage the CUSTOM VOICE EDIT mode. The
X
Select a Preset Voice
Select the preset voice on which the custom
voice will be based via the
LCD dials. The control below the large
and symbols scrolls quickly through the voice list
while the control below the smaller and symbols
scroll more slowly.
C
Select Easy or Full Edit
Press the
button to go to the corresponding mode. The EASY
EDIT mode cannot be selected when a drum kit
voice is selected for editing.

EXITING

.................................................................................................................................................................................................
Exit from the CUSTOM VOICE EDIT mode
when done by pressing either the [CUSTOM VOICE
EDIT] or [EXIT] button.
NOTES
• If the edited data was not stored to disk before pressing
the [EXIT] button, the "Edited data not stored! Store data?"
confirmation will appear on the display. Pressing "YES"
will go to the STORE function, "NO" will exit from the
CUSTOM VOICE EDIT mode, or CANCEL will return to
the previous display.
84
This mode makes it possible to create new voices by editing some param-
• Optional Yamaha "Sample Data Disks" can also be loaded via the DISK LOAD function (page
NOTES
96).
• Not all disk titles are available in all areas.
• To load only custom voice data from the supplied disk, press the [DISK] button, press the
DISK LOAD LCD button, and then insert the disk.

Engaging the Easy/Full Edit Mode

display will appear.
......................................
,
...............................
or
............................................................................................................
, and
LCD
SONG
PLAY VOICE EDIT
SONG
RECORD ACCOMP. REC
SONG CUSTOM
PLAY VOICE EDIT FUNCTION
SONG
CUSTOM
RECORD ACCOMP. REC DISK
CUSTOM
FUNCTION
EXIT
CUSTOM
DISK