Use For The Intended Purpose - Siemens SIMOTICS T-1FW6 Series Configuration Manual

Description of the motor

2.2 Use for the intended purpose

2.2 Use for the intended purpose
Risk of death and material damage as a result of incorrect use
There is a risk of death, serious injury and/or material damage when direct drives or their
components are used for a purpose for which they were not intended.
• Only use the motors for industrial or commercial plants and systems.
• Do not install the motors in hazardous zones if the motors have not been expressly and
• Only use direct drives and their components for applications that Siemens has explicitly
• Protect the motors against dirt and contact with corrosive substances.
• Ensure that the installation conditions comply with the rating plate specifications and the
• Contact your local Siemens office if you have any questions relating to correct use.
• If you wish to use special versions and design versions whose technical details vary
Danger to life for wearers of active implants due to magnetic and electrical fields
Electric motors pose a danger to people with active medical implants, e.g. cardiac
stimulators, who come close to the motors.
• If you are affected, stay a minimum distance of 300 mm from the motors (tripping
In conjunction with the SINAMICS S120 drive system, the built-in torque motors can be used
as a direct drive for the following machine applications, for example:
● Rotary tables, especially for milling-turning applications
● Turning spindles
● Gear cutting machines
● Roller and cylinder drives
You can use Motor Modules in the "blocksize", "booksize" or "chassis" formats.
28
WARNING
explicitly designed and authorized for this purpose. Carefully observe any special
additional notes provided.
specified.
condition specifications contained in this documentation. Where relevant, take into
account deviations regarding approvals or country-specific regulations.
from the motors described in this document, then you must contact your local Siemens
office.
WARNING
threshold for static magnetic fields of 0.5 mT according to the Directive 2013/35/EU).
1FW6 High Speed built-in torque motors
Configuration Manual, 01/2020, 6SN1197-0AE03-0BP3