Configuring Workflow - Siemens SIMOTICS T-1FW6 Series Configuration Manual

Configuration

5.2 Configuring workflow

5.2 Configuring workflow
Requirements
Your choice of torque motor depends on the following factors:
● The peak and rms torque of the duty cycle required for the application
● The required speed and angular acceleration
● The installation space available
● The required/possible drive arrangement
(single/parallel operation)
● The required cooling method
88
1FW6 High Speed built-in torque motors
Configuration Manual, 01/2020, 6SN1197-0AE03-0BP3