Description Of The Motors; Use For The Intended Purpose - Siemens SIMOTICS S-1FK2 Operating Instructions Manual

Description of the motors

2.1

Use for the intended purpose

Use not as intended
If you do not use the motors correctly, there is a risk of death, severe injury and/or material
damage.
• Only use the motors for their intended purpose.
• Do not use the motors in hazardous areas (where there is a risk of explosion), if the motors
• Make sure that the conditions at the location of use comply with all the rating plate data.
• Make sure that the conditions at the location of use comply with the conditions specified in
Malfunctions of active active implants due to magnetic and electrical fields
Electric motors endanger people with active implants, for example heart pacemakers, who
come close to the motors.
• If you are affected, stay a minimum distance of 30 cm away from the motors (tripping
Please contact your local Siemens office in the following cases:
• If you wish to use special versions and design variants whose specifications vary from the
motors described in this document.
• You have questions about the intended use.
The motor is intended for industrial or commercial plants.
The motor is designed for operation in sheltered areas under normal climatic conditions, such
as those found on shop floors.
For more detailed information, refer to Chapter "Ambient conditions (Page 24)".
The motor is only approved for operation through a converter.
Any other use of the motor is considered to be incorrect use.
Compliance with all specifications in the operating instructions is part of correct usage.
Observe the details on the rating plate.
SIMOTICS S-1FK2 synchronous motors for SINAMICS S120
Operating Instructions, 02/2022, A5E46089564B AD
WARNING
have not been expressly released and authorized for these types of applications. Carefully
observe any special supplementary notes that may be attached.
this documentation. When necessary, take into account deviations regarding approvals or
country-specific regulations.
WARNING
threshold for static magnetic fields of 0.5 mT according to Directive 2013/35/EU).
2
19