Command Manual – IP Address and Performance
H3C S3610&S5510 Series Ethernet Switches
TCPCB
03e37dc4
04217174
Table 2-7 Description on the fields of the display tcp status command
*
TCPCB
Local Add:port
Foreign Add:port
State
2.1.9 display udp statistics
Syntax
display udp statistics
View
Any view
Parameter
None
Description
Use the display udp statistics command to display statistics of UDP flows.
Related command: reset udp statistics.
Example
# Display statistics of UDP flows.
<Sysname> display udp statistics
Received packets:
Total: 0
checksum error: 0
shorter than header: 0, data length larger than packet: 0
unicast(no socket on port): 0
broadcast/multicast(no socket on port): 0
not delivered, input socket full: 0
input packets missing pcb cache: 0
Local Add:port
0.0.0.0:4001
100.0.0.204:23
Field
2-15
Chapter 2 IP Performance Configuration Commands
Foreign Add:port
0.0.0.0:0
100.0.0.253:65508
Description
A connection with this mark is an MD5
encrypted TCP connection
TCP control block
Local address and port number
Remote IP address and port number
State of TCP connections
State
Listening
Established