H3C S3610 Series Operation Manual
H3C S3610 Series Operation Manual

H3C S3610 Series Operation Manual

Hide thumbs Also See for S3610 Series:

Advertisement

Operation Manual - File System Management
H3C S3610&S5510 Series Ethernet Switches
Chapter 1 File System Management Configuration ................................................................... 1-1
1.1 File System Management .................................................................................................. 1-1
1.1.1 File System Overview ............................................................................................. 1-1
1.1.2 Directory Operations ............................................................................................... 1-2
1.1.3 File Operations ........................................................................................................ 1-2
1.1.4 Storage Device Operations ..................................................................................... 1-4
1.1.5 File System Prompt Mode Setting........................................................................... 1-5
1.1.6 File System Operations Example............................................................................ 1-5
1.2 Configuration File Management......................................................................................... 1-6
1.2.1 Configuration File Overview .................................................................................... 1-6
1.2.2 Saving the Current Configuration............................................................................ 1-7
1.2.3 Erasing the Startup Configuration File .................................................................... 1-8
1.2.4 Specifying a Configuration File for Next Startup ..................................................... 1-9
1.3 Displaying and Maintaining Device Configuration ........................................................... 1-10
Chapter 2 FTP Configuration ....................................................................................................... 2-1
2.1 FTP Overview .................................................................................................................... 2-1
2.1.1 Introduction to FTP.................................................................................................. 2-1
2.1.2 Implementation of FTP............................................................................................ 2-1
2.2 Configuring the FTP Client ................................................................................................ 2-2
2.2.1 Establishing an FTP Connection............................................................................. 2-2
2.2.2 Configuring the FTP Client...................................................................................... 2-4
2.2.3 FTP Client Configuration Example.......................................................................... 2-5
2.3 Configuring the FTP Server ............................................................................................... 2-7
2.3.1 Configuring FTP Server Operating Parameters...................................................... 2-7
2.3.3 FTP Server Configuration Example ........................................................................ 2-9
2.4 Displaying and Maintaining FTP ...................................................................................... 2-11
Chapter 3 TFTP Configuration ..................................................................................................... 3-1
3.1 TFTP Overview .................................................................................................................. 3-1
3.1.1 Introduction to TFTP ............................................................................................... 3-1
3.1.2 Implementation of TFTP.......................................................................................... 3-1
3.2 Configuring the TFTP Client .............................................................................................. 3-2
3.3 Displaying and Maintaining the TFTP Client ..................................................................... 3-4
3.4 TFTP Client Configuration Example .................................................................................. 3-4

Table of Contents

i
Table of Contents

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the S3610 Series and is the answer not in the manual?

Questions and answers

Summary of Contents for H3C S3610 Series

  • Page 1: Table Of Contents

    Operation Manual – File System Management H3C S3610&S5510 Series Ethernet Switches Table of Contents Table of Contents Chapter 1 File System Management Configuration ..............1-1 1.1 File System Management ....................1-1 1.1.1 File System Overview ..................... 1-1 1.1.2 Directory Operations ....................1-2 1.1.3 File Operations ......................
  • Page 2: Chapter 1 File System Management Configuration

    Operation Manual – File System Management H3C S3610&S5510 Series Ethernet Switches Chapter 1 File System Management Configuration Chapter 1 File System Management Configuration When configuring the file system management, go to these sections for information you are interested in: File System Management...
  • Page 3: Directory Operations

    Operation Manual – File System Management H3C S3610&S5510 Series Ethernet Switches Chapter 1 File System Management Configuration 1.1.2 Directory Operations Directory operations include create, delete, display the current path, display specified directory or file information as shown in the following table: To do…...
  • Page 4 Operation Manual – File System Management H3C S3610&S5510 Series Ethernet Switches Chapter 1 File System Management Configuration To do… Use the command… Remarks Optional reset recycle-bin Empty the recycle bin [ /force ] Available in user view Optional Display the contents of a Currently only a .txt file...
  • Page 5: Storage Device Operations

    Operation Manual – File System Management H3C S3610&S5510 Series Ethernet Switches Chapter 1 File System Management Configuration 1.1.4 Storage Device Operations I. Naming rules Naming rules of the storage devices are as follows: If there is only one storage device of the same type on the device, the physical device name of the storage device is the storage device name.
  • Page 6: File System Prompt Mode Setting

    Operation Manual – File System Management H3C S3610&S5510 Series Ethernet Switches Chapter 1 File System Management Configuration Caution: When you format a storage device, all the files stored on it are erased and cannot be restored. In particular, if there is a startup configuration file on the storage device, formatting the storage device results in loss of the startup configuration file.
  • Page 7: Configuration File Management

    Operation Manual – File System Management H3C S3610&S5510 Series Ethernet Switches Chapter 1 File System Management Configuration flash:/test # Display the files and the subdirectory under the test directory. <Sysname> dir Directory of flash:/test/ drw- Feb 16 2006 15:28:14 mytest 2540 KB total (2519 KB free) # Return to the upper directory.
  • Page 8: Saving The Current Configuration

    Operation Manual – File System Management H3C S3610&S5510 Series Ethernet Switches Chapter 1 File System Management Configuration Save only non-default configuration settings. List commands in sections by view in this view order: system, interface, routing protocol, and so on. Sections are separated with one or multiple blank lines or comment lines that start with a pound sign (#).
  • Page 9: Erasing The Startup Configuration File

    Operation Manual – File System Management H3C S3610&S5510 Series Ethernet Switches Chapter 1 File System Management Configuration Follow the step below to save the current configuration: To do… Use the command… Remarks Required Save the current save [ file-name | safely ]...
  • Page 10: Specifying A Configuration File For Next Startup

    Operation Manual – File System Management H3C S3610&S5510 Series Ethernet Switches Chapter 1 File System Management Configuration 1.2.4 Specifying a Configuration File for Next Startup Follow the step below to specify a configuration file for next startup: To do… Use the command…...
  • Page 11: Displaying And Maintaining Device Configuration

    Operation Manual – File System Management H3C S3610&S5510 Series Ethernet Switches Chapter 1 File System Management Configuration III. Restoring the startup configuration file To do… Use the command… Remarks restore Required Restore the startup startup-configuration configuration file Available in user view...
  • Page 12 Operation Manual – File System Management H3C S3610&S5510 Series Ethernet Switches Chapter 1 File System Management Configuration Note: For detailed description of the display this and display current-configuration commands, refer to the System Maintaining and Debugging Configuration part of the manual.
  • Page 13: Chapter 2 Ftp Configuration

    Operation Manual – File System Management H3C S3610&S5510 Series Ethernet Switches Chapter 2 FTP Configuration Chapter 2 FTP Configuration When configuring FTP, go to these sections for information you are interested in: FTP Overview Configuring the FTP Client Configuring the FTP Server Displaying and Maintaining FTP 2.1 FTP Overview...
  • Page 14: Configuring The Ftp Client

    Operation Manual – File System Management H3C S3610&S5510 Series Ethernet Switches Chapter 2 FTP Configuration Figure 2-1 Network diagram for FTP Caution: The FTP function is available when a route exists between the FTP server and the FTP client. When a device serving as the FTP server logs onto the device using IE, some IE functions are not supported because multiple user connections are established, and the device supports only one connection currently.
  • Page 15 Operation Manual – File System Management H3C S3610&S5510 Series Ethernet Switches Chapter 2 FTP Configuration The source address specified with the ftp client source command is valid for all ftp connections and the source address specified with the ftp command is valid only for the current FTP connection.
  • Page 16: Configuring The Ftp Client

    Operation Manual – File System Management H3C S3610&S5510 Series Ethernet Switches Chapter 2 FTP Configuration To do… Use the command… Remarks server indirectly in FTP open ipv6 server-address client view [ service-port ] [ -i interface-type interface-number ] 2.2.2 Configuring the FTP Client...
  • Page 17: Ftp Client Configuration Example

    Operation Manual – File System Management H3C S3610&S5510 Series Ethernet Switches Chapter 2 FTP Configuration To do… Use the command… Remarks Find the working path of Optional the FTP client Create a directory on the mkdir directory Optional FTP server...
  • Page 18 Operation Manual – File System Management H3C S3610&S5510 Series Ethernet Switches Chapter 2 FTP Configuration II. Network diagram FTP Client FTP Server 10.2.2.1/16 10.1.1.1/16 IP network Switch Console Figure 2-2 Network diagram for FTPing an image file from an FTP server III.
  • Page 19: Configuring The Ftp Server

    Operation Manual – File System Management H3C S3610&S5510 Series Ethernet Switches Chapter 2 FTP Configuration 227 Entering Passive Mode (10.1.1.1,4,1). 125 BINARY mode data connection already open, transfer starting for aaa.bin..226 Transfer complete. FTP: 5805100 byte(s) received in 19.898 second(s) 291.74Kbyte(s)/sec.
  • Page 20: Configuring Authentication And Authorization For Accessing Ftp Server

    Operation Manual – File System Management H3C S3610&S5510 Series Ethernet Switches Chapter 2 FTP Configuration To do… Use the command… Remarks Optional 30 minutes by default. In idle-timeout time, if there is no Configure the ftp timeout minutes information interaction between...
  • Page 21: Ftp Server Configuration Example

    Operation Manual – File System Management H3C S3610&S5510 Series Ethernet Switches Chapter 2 FTP Configuration To do… Use the command… Remarks Optional By default, the user level is 0. if Assign the priority level the client is to perform the write...
  • Page 22 Operation Manual – File System Management H3C S3610&S5510 Series Ethernet Switches Chapter 2 FTP Configuration [Sysname-luser-abc] work-directory flash:/ [Sysname-luser-abc] quit # Enable FTP server. [Sysname] ftp server enable [Sysname] quit # Check files on your device. Remove those redundant to ensure adequate space for the startup file to be uploaded.
  • Page 23: Displaying And Maintaining Ftp

    Operation Manual – File System Management H3C S3610&S5510 Series Ethernet Switches Chapter 2 FTP Configuration <Sysname> reboot Caution: Startup files for next startup must be saved under the root directory. You can copy or move a file to change the path of it to the root directory. For description of the corresponding command, refer to the System Maintaining and Debugging part of the manual.
  • Page 24: Chapter 3 Tftp Configuration

    Operation Manual – File System Management H3C S3610&S5510 Series Ethernet Switches Chapter 3 TFTP Configuration Chapter 3 TFTP Configuration When configuring TFTP, go to these sections for information you are interested in: TFTP Overview Configuring the TFTP Client Displaying and Maintaining the TFTP Client TFTP Client Configuration Example 3.1 TFTP Overview...
  • Page 25: Configuring The Tftp Client

    Operation Manual – File System Management H3C S3610&S5510 Series Ethernet Switches Chapter 3 TFTP Configuration Figure 3-1 TFTP configuration diagram Before using TFTP, the administrator needs to configure IP addresses for the TFTP client and server, and make sure that there is a route between the TFTP client and server.
  • Page 26 Operation Manual – File System Management H3C S3610&S5510 Series Ethernet Switches Chapter 3 TFTP Configuration The source address specified with the tftp client source command is valid for all tftp connections and the source address specified with the tftp command is valid only for the current tftp connection.
  • Page 27: Displaying And Maintaining The Tftp Client

    Operation Manual – File System Management H3C S3610&S5510 Series Ethernet Switches Chapter 3 TFTP Configuration 3.3 Displaying and Maintaining the TFTP Client To do… Use the command… Remarks Display the configuration display tftp client Available in any view of the TFTP client configuration 3.4 TFTP Client Configuration Example...
  • Page 28 Operation Manual – File System Management H3C S3610&S5510 Series Ethernet Switches Chapter 3 TFTP Configuration # Assign VLAN-interface 1 an IP address 1.1.1.1/16, making sure that the port connected to PC belongs to the same VLAN. [Sysname] interface vlan-interface 1 [Sysname-Vlan-interface1] ip address 1.1.1.1 255.255.0.0...

This manual is also suitable for:

S5510 series

Table of Contents