Display Fib Ip-Address - H3C S3610 Series Command Manual

Command Manual – IP Address and Performance
H3C S3610&S5510 Series Ethernet Switches
127.0.0.1/32
# Display all lines from the one that contains string "127"
<Sysname> display fib | begin 127
Flag:
U:Useable
R:Reject
Destination/Mask
127.0.0.0/8
127.0.0.1/32
# Display FIB forward information filtered through the abc0 prefix list
<Sysname> display fib ip-prefix abc0
Route Entry matched by prefix-list abc0:
Summary count: 2
Flag:
U:Useable
R:Reject
Destination/Mask
127.0.0.0/8
127.0.0.1/32

2.1.2 display fib ip-address

Syntax
display fib ip-address1 [ { mask1 | mask-length1 } [ ip-address2 { mask2 |
mask-length2 } | longer ] | longer ]
View
Any view
Parameter
ip-address1, ip-address2: Destination IP address, in dotted decimal notation.
ip-address1 and ip-address2 together determine an address range for the FIB items to
be displayed.
mask1, mask2: IP address mask.
mask-length1, mask-length2: Length of IP address mask, namely, the number of "1" in
succession in the masks.
longer: Displays FIB entries that match the specified address/mask and have masks
longer than or equal to the mask that a user enters. If no masks are specified, FIB
127.0.0.1 HU
G:Gateway H:Host
L:Generated by ARP or ESIS
Nexthop Flag TimeStamp
127.0.0.1 U
127.0.0.1 HU
G:Gateway H:Host
L:Generated by ARP or ESIS
Nexthop Flag TimeStamp
127.0.0.1 U
127.0.0.1 HU
2-3
Chapter 2 IP Performance Configuration Commands
t[1141138116] InLoop0
B:Blackhole D:Dynamic
Interface
t[1141138116] InLoop0
t[1141138116] InLoop0
B:Blackhole D:Dynamic
Interface
t[1141138116] InLoop0
t[1141138116] InLoop0
S:Static
S:Static